While there has been quite a debate over Apple’s decision to provide an SD card slot rather than an ExpressCard slot on the MacBook Pro 13″ and 15″ models, the fact of the matter remains that these machines are available and that many of us will be using these laptops. So how do we make the best use of our new port?
The first few suggestions are obvious – use the card reader to read the information from your SD compatible camera, PDA, or cell phone. Also use the SD card for removable storage just as you would use a USB flash drive.
In my overall review of the MacBook Pro at its release, I had gone into detail on the storage capabilities of the SD cards to come. And I touched on the bootability aspect of the SD card slot. But what makes this important? Well the answer is twofold. A trim, clean, uncluttered startup disk boots much faster than one with all your programs and files installed on it. As a laptop typically only comes with one hard drive, we used to be limited to using the internal drive with all our saved data and programs cluttering it up, or carrying around a separate external boot drive such as a Mercury On-The-Go or Express. The SD card is physically so much smaller and an 8GB card has more than enough room to hold a trim, clean version of OS X 10.5 (a 16GB SD card has enough room to hold a full version of the OS). Just make sure you don’t pull out the SD card while you’re still using it.
Additionally and more importantly, an SD card with the operating system installed can be used as an emergency startup disk. In the case of a corrupted drive directory structure, this can come in very handy if you find yourself unable to boot your MacBook Pro. For more detailed information on restoring a corrupted drive, read OWC Larry’s article “Resolving System Problems”
So, how do you go about making a bootable SD card? It’s actually quite simple.
To install OS X 10.5, you’ll need at least an 8GB card (There should be smaller space requirement for Snow Leopard, but we won’t know for sure until after its release).
Format the SD card using disk utility. Under the “Partition” tab, highlight the SD card you want to format. Set the card for one partition and Format: Mac OS Extended Journaled. Give the volume a name and click on “Options”. You need to choose GUID partition table in order to boot from the card. Click “Apply” and the drive will be erased and formatted correctly.
Once formatted, use your OS X 10.5 install DVD and run the installer. Select the SD card as the destination. Follow the prompts until you get to the “Install Summary” page.
Choose “customize” on the Install Summary page and uncheck Printer Drives, Additional Fonts, Languages, etc. so all you’re left with is the “Essential System Software” checked. Don’t worry, it should be grayed out as an option that you can’t accidentally uncheck. This will cut the installation space in about 6.2GB from 11.6GB. Click install and let it work. When its done installing it is ready to use. Along with the OS, it is also a good idea to keep a few disk utilities on your emergency startup disk. Just a few we suggest are:
To boot exclusively from the SD card, set the SD card as the Startup disk in System Preferences>Startup Disk.
Otherwise, insert the card and hold the option key at startup to manually choose the SD card as your Emergency Startup Disk.