OWC Blog - blog.macsales.com

Archive for » October, 2009 «

Confirmed! OWC brand 8GB RAM works in new MacBook

Friday, October 23rd, 2009 | Author: OWC Michael

8gbmacbookWith Apple’s new machine releases, we’re hard at work in the OWC Test Labs seeing just how fast we can make the machines go.

Our first machine that we’re looking at is the October 2009 2.26GHz MacBook.  This machine is pretty tight on the inside – meaning there isn’t much extra unnecessary space inside.  Like the iPod and iPhone, conservation of space seems to be a high-priority of Apple’s design teams.  So even though the machine is lighter and sleeker, it does pose some drawbacks in upgrading.  This Macbook has no problem running either a 5400rpm, 7200rpm or SSD drive for the fastest speeds, however; the physical height of the drive is limited to the 9.5mm form factor.  The 12.5mm drives are too tall to fit in the space provided.

I should reiterate that point.  The drive doesn’t officially fit.  Sure, we were able to cram it in, and screw the cover closed (with a little bowing of the bottom) but we don’t suggest or will support actually running the drive this way.  Too much physical pressure on a drive can certainly contribute to early drive failure – it’s just not worth risking your data or the expense of a warranty compromised drive.

We’re pleased to announce our findings that our OWC brand memory certainly takes the cake in these machines!  While Apple lists 4GB as the maximum amount of installable memory, our 8GB memory kit OWC8566DDR3S8GP is now tested and fully certified for the full 8GB utilization – a real performance benefit for memory intensive application loads. While we were at it, we also tested another brand 8GB memory kit and found it consistently caused kernel panics and non-boot issues. Now to be fair, we didn’t go deep into troubleshooting and determine if one or both of the other brand’s modules had a bad chip, pin, etc. What we’re stressing here is even if tech specs are the same, we recommend you make sure the product you are buying does list complete specs and testing parameters, including performance benchmarks, so you can make the best informed purchase decision.

When we talk about how OWC brand memory meets or exceeds all Apple requirements for memory, it’s not just idle chatter or marketing-speak. Our on-premise testing lab enables us to physically confirm this fact for every machine listed in our compatibility charts.  Then, we back our quality assurance with a lifetime warranty.  How can you go wrong?

Apple pulls the plug on FireWire in the new 13.3″ 2.26GHz MacBook

Thursday, October 22nd, 2009 | Author: OWC Chris S.

firewire-whipIn case you missed it in our other posts, there’s an important change in the new 13.3″ 2.26GHz MacBook White that Apple announced earlier this week: FireWire compatibility has been removed completely.

This is an important thing to note, as this means that if you have any older FireWire-only devices, you’re not going to be able to use them with the new MacBook.

This is not an entirely surprising development, though; we’ve been given glimpses of this direction for quite a while. Apple has reduced FireWire’s presence to a single FireWire 800 port on most models (though the Mac Pro has four) and has completely eliminated FireWire 400. Given this reduction, removing FireWire entirely on the “consumer” models seems to be the next logical step.

In fact, we were given a preview of this step this time last year, when the aluminum Unibody portables were first introduced. The 13″ model was labeled as a “MacBook” and had no FireWire ports, just USB. Does that sound slightly familiar? Sure, the 13″ aluminum ‘Book eventually did get FireWire back, in the form of a single FW800 port, but it is also important to note that when it did, it was also reclassified as a “MacBook Pro”.

So, really, Apple removing FireWire from the $999 13.3″ 2.26GHz MacBook White is nothing to be all that shocked about. We’ve ridden that ride and purchased the souvenir t-shirt.

Don’t get me wrong… I’m not happy about this development at all. I liked FireWire and still find it superior to USB 2.0 for most data transfer purposes. Unfortunately, though, its popularity seems to be on the wane, and we – as Mac users – should probably get used to it.

Fortunately, most of the newer storage solutions and consumer electronics have USB 2.0 functionality built in, so you still have options for external storage and data capture.

It just won’t be quite as fast.

Upgrading the new MacBook… a Closer Look.

Wednesday, October 21st, 2009 | Author: OWC Chris S.

magnifying-glassWhen it comes to redesigns, the new MacBooks have the most external changes. The case is now a Unibody design, only made of a polycarbonate material, rather than the aluminum of the MacBook Pros. As part of that change, the battery is now non-removable, keeping it in line with the rest of Apple’s portable line, and, as an added touch, the bottom is now rubberized, to prevent it from sliding around while in use.

Of course, as with many Apple updates, we wind up losing something, too. This time around, was the final death knell for FireWire on the MacBook. This isn’t much of a surprise, however. About this time last year, when Apple announced the original aluminum Unibody portables, the MacBook model had no FireWire, either. That was an interface found only on the MacBook Pro models, and the older-design MacBooks. When they finally did add FireWire to the 13″ aluminum MacBook, Apple also tacked on “Pro” to the end of the name. In light of all this, losing FireWire on the new MacBooks really isn’t all that surprising. Disappointing? Yes, but not surprising.

Despite the outward appearances, though, when it comes to upgrading, there’s not a whole lot of difference in options between the older MacBooks and this new one. Your main upgrades will be the memory and the hard drive.

Article Continues…

New Apple Remote

Tuesday, October 20th, 2009 | Author: OWC Michael

AppleRemoteALI for one think its about time that the Apple remote received a bit of a facelift.  While most of the Apple line went from white to Aluminum, the apple remote itself remained white.  Until now.

The play/pause button has been relocated on the remote to the lower right next to the menu button, making it a bit easier to press than the center button on the previous model.  I for one kept accidentally turning down my volume while trying to use the functions of that button.

While functionally the same as its predecessor, the new look to match the MacBook Pro, iMac, and outer edge of the Mac mini is a welcome change.  It is even compatible with all the Apple products that the prior remote is compatible with, so no issues with backwards compatibility.

Category: Misc.

Beefing up the Consumer side

Tuesday, October 20th, 2009 | Author: OWC Chris S.

waitdoneAfter last month’s rather disappointing iTunes event, it’s good to see an Apple product announcement with some substance behind it.

This time around, the improvements were made to products that traditionally catered to the “consumer” end: the iMac, the Mac mini, and the MacBook. There were also a couple of tweaks to the AirPort Extreme Base Station and Time Capsule, though nothing really worth noting. Rounding out the bunch was the introduction of a new multi-touch mouse.

As we get these new models in for testing (and, of course, videos showing you how to upgrade them) we’ll be going over them in a little more detail. For now, though, let’s reflect on what’s been announced and what potential they hold.

Article Continues…

Upgrading the new iMacs…A Closer Look

Tuesday, October 20th, 2009 | Author: OWC Grant

magnifying-glassIf you remember the old Kojack TV show…the phrase “who loves ya” baby came to mind thinking about some features on and upgrades for the new iMacs released today.

A feature long requested for iMacs – the ability to use your desktop computer as a secondary display for your laptop – is finally a reality!

From the iMac Features section on the Apple website:

Mini DisplayPort.
The Mini DisplayPort lets you connect an external display, including the Apple LED Cinema Display, to your iMac. On the 27-inch iMac, the same port offers input, too. So you can connect any external source that has DisplayPort output — including a MacBook or MacBook Pro — and use your iMac as a display.

This means if you have a MacBook or MacBook Pro for mobile computing, you don’t need to invest in/provide the room for a secondary display…just connect to your iMac when you get back to the desktop.

Now that you know what really got our motors revving here on these new “smoking machines” as OWC Jamie called them, I can tell you how to really make them scream with these OWC upgrades.

MEMORY

According to Apple’s Tech Specs page, all the new iMac models come with 4GB (2 x 2GB) of 1066MHz DDR3 SDRAM and can support up to 16GB via four memory slots.

If you want to bump that to 8GB (4 x 2GB) via Apple, that will set you back $200.00. The OWC 4GB Upgrade Kit (2 x 2GB) can be added to the factory stock 4GB for a total of 8GB…but at a substantial lower cost of $87.99.

We’ve got more options too…the OWC 8GB Upgrade Kit (2 x 4GB) adds 8GB to the factory stock 4GB for 12GB total memory for $475.99.

That same 8GB (2 x 4GB) upgrade for the 27 inch models from the factory is $600…

While the factory doesn’t offer the ultimate memory configuration of 16GB for the 21 inch iMac models, we do (who loves ‘ya baby?) and at savings over what’s offered for the 27 inch models. You can put two of the OWC 8GB Upgrade Kits into any of the iMacs for 16GB total at a cost of $952 versus $1,400 for the same 16GB offered by the factory for the 27 inch models only.

And like all our memory upgrades, we give you up to $45 cash back for your iMac’s factory memory modules!

STORAGE

The base 21.5 inch model comes with a 500GB hard drive while the other 21.5 and both 27 inch models come with a 1TB hard drive. The only option offered by the factory is a 2TB for $250.00. Taking a quick look at our current iMac upgrade page, one can find a 1.5TB drive for $129.99 and a 2TB for $239.99.

With all the options and savings we offer for the new iMacs, I’m thinking we should do a commercial with as equally a memorable ending as these Chicago area favorites.

Upgrading the new Mac mini…a Closer look

Tuesday, October 20th, 2009 | Author: OWC Grant

magnifying-glassWhile I share OWC Larry’s disappointment in the mini not getting a built in memory expansion boost, there still is a silver lining here. I’ll be taking a closer look at the new Mac models and showing you where you can upgrade and/or get more for your technology budget with comparable high performance upgrades/accessories from OWC.

I’ll start off with the $599.00 2.26GHz mini because I’m a value hound. It comes stock with 2GB of RAM and a 160GB 5400 RPM hard drive. OWC offers the following money saving upgrades to get the max from your mini:

4GB OWC Memory Upgrade Kit (2 x 2GB) is $87.99 versus Apple at $100.00.

You can store more for less too! A 320GB 5400 RPM hard drive starts at $65.99 versus Apple at $100 while a 500GB 5400RPM hard drive starts at $92.99 versus Apple at $200. Man, other than the faster processor, you could match the memory and HD specs of the $799.00 2.53GHz model and save $46.02.

One more thing caught my eye on the Configure your Mac mini page…the Mini DisplayPort Adapters. And once again, OWC has the options you need.

Our Mini DisplayPort to DVI Adapter is priced at $19.99 versus Apple’s at $29.99 while our MiniDisplay Port to VGA Adapter is $24.99 versus Apple at $29.00.

And if you’re digging the new dual 500GB hard drive Mac mini Server model, but are looking for more options to the factory external storage and SuperDrive offerings, we got ‘em!

While the External MacBook Air SuperDrive is USB bus powered, it is $99 and burns rather slowly: up to 8X DVD, 4X DVD Dual Layer, and 24X CD-R.

It’s almost not fair to compare that to the  OWC “Value Line” USB2.0/1.1 SuperDrive with up to 22X DVD, 12X DVD Dual Layer, and 40X CD-R burn speeds at just $64.99

And last but not least…that SmartStor 4 x 1TB FW800/FW400/USB external storage solution for $799 doesn’t seem like quite the smart buy when you could have the 4TB OWC Mercury Elite-AL Pro Qx2 for $699 and get a “Quad Interface” of FW800/FW400/USB and eSATA!

So there you have it…a pretty thorough examination of how you can max your mini with OWC. Revisit the blog to see my takes on the iMac and white MacBook models and how you can get the most from them too.

The “new” Mac minis?

Tuesday, October 20th, 2009 | Author: OWC Larry

macmini-20091020Typo in ‘new’ Mac mini page or just marketing play on words?

As our team goes full bore on the new iMac and Mac minis that just popped on the Apple site, I’m sitting back a little disappointed with the ‘new’ Mac minis.

Apple is touting with ‘up to twice as much memory’, but it still only supports up to 4GB. That’s the same as the previous Mac mini line up….

Apparently it counts that they are with up to twice as much memory as before they came with 1GB or 2GB standard, 4GB optional. Because Apple now has a configuration which comes with 4GB  standard, that’s twice as much memory Standard as had been before.

The Mac mini would be an incredible powerhouse with 8GB, that’s what twice the memory should have meant. We were excited, at first, thinking Apple taken off the Mac mini’s memory ‘restrictor plate’, but alas – just a marketing play on words.

- OWC Larry

See All of OWC’s Mac mini Upgrades and Enhancements in our dedicated Mac mini section