Five Things You Need to Know Before Upgrading Your 2009 or Later iMac

PR_imac_HDDkitWant to upgrade your 2009 or later iMac’s hard drive or memory? There’s a very good chance that it can be done, depending on the model you own. But before you dive in on your upgrade – and even if you already have begun – there are some very important things you need to know.

The Rocket Yard has outlined a guide on some of the most crucial information you’ll need when it comes to upgrading your iMac.

1) Avoid the Noise
If you have previously researched a guide on how to upgrade the hard drive in your iMac, you might have come across fellow iMac owners commenting on issues involving a blaring, revving or noisy fan.

If you haven’t, we will break it down for you:

The problem: With the introduction of the iMac, Apple’s factory-installed drives contained custom firmware that communicated thermal data to the System Management Controller (SMC). Unfortunately, off-the-shelf hard drives don’t include the custom firmware, and as a result, the SMC is unable to monitor the temperature of the hard drive. This causes the iMac fans to run at full speed and fail Apple diagnostics as a failsafe. Despite various “hacks”, the best solution was to still use Apple’s SMC to ensure proper monitoring of drive and system health.

The solution: Fortunately, OWC was able to come up with a solution with its In-Line Digital Thermal Sensor – the first hardware digital thermal sensor on the market allowing a third-party SATA drive to be installed in an iMac. The sensor eliminates “blaring” fan noise and maintains proper system fan control through the iMac’s System Management Controller. The sensor is designed specifically for the iMac, requires no software hacks, and ensures compatibility with Apple’s built-in diagnostic processes.

So, if you’ve upgraded your iMac’s hard drive and notice a blaring fan, don’t panic. There is a solution. For more on this topic, please read this Rocket Yard article.

2) Maximum Internal Capacity
It might not seem so on the surface, but the all-in-one iMac can fit more storage internally than you might have thought*. In fact, some iMac models have more than one drive bay and can even swap out the optical drive for Data Doubler. With our My Upgrades tool, you can see how much storage each iMac model from 2009-current is compatible with.

Professional Installation

3) Professional Installation Recommended
While the sleek design makes late 2012-current iMac models aesthetically pleasing, it also brings challenges when upgrading internal hardware. If you are planning an upgrade for one of these iMacs, it is highly recommended that you seek professional installation. After all, an iMac is much less aesthetically pleasing with a crack on its screen.

4) Adding More Memory
Lots of OWC RAMEvery iMac – aside from some of the latest 21.5” models – is compatible with a memory upgrade. In fact, the 27-inch Late 2015 iMac with Retina 5K display is compatible with up to 64GB of RAM!

Visit our convenient My Upgrades tool to see how much memory your iMac is compatible with.

5) Newly Vintage, But Sierra Compatible
Apple considers iMacs models from before 2009 “obsolete”. The models from 2009 are considered “vintage” as of March 2016. But what does this mean? Here is Apple’s definition of the terms.

Vintage: Products that have not been manufactured for more than five and less than seven years ago. Apple has discontinued hardware service for vintage products with a few exceptions that can be found here.

Obsolete: Products that were discontinued more than seven years ago. Apple has discontinued all hardware service for obsolete products with no exceptions. Service providers cannot order parts for obsolete products.

Of course, in the world of Macs, obsolete doesn’t have to mean obsolete. And as for the Late 2009 iMac, it might be considered vintage, but it is still compatible with macOS Sierra so you will have access to the latest Mac operating system.

Upgrades Made Easy
Upgrading the hard drive or memory in your iMac is a great way to boost its performance and extend its lifespan. To see all of the upgrade options for your iMac, check out the MacSales.com My Upgrades search tool to find your specific model and compatible upgrade solutions!

* iMac capacities may very depending on the exact Model ID


LEAVE A COMMENT

LEAVE A REPLY TO Dr. Mike Hughes CLICK HERE TO CANCEL REPLY


  • Hi… Your simple 3-step process doesn’t work for me. My iMac: 27″ Late 2009, 3.06 GHz DDR3 ..startup: Mac HD…Graphics ATI Radeon HD 4670 256 MB
    memory 4GB
    Serial: W89497XQ5PE
    This computer is not shown in your choices, for your upgrade tool.

    PS… no idea what a model identifier is.. Regards, Michael




  • I have an iMac 24 early 2009.
    Model Name: iMac
    Model Identifier: iMac9,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.66 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 6 MB
    Memory: 4 GB
    Bus Speed: 1.07 GHz
    Boot ROM Version: IM91.008D.B08
    SMC Version (system): 1.45f0
    Serial Number (system): W89170K40TG
    Hardware UUID: 5FA4FD7A-0FE2-55AD-80BF-AFBDCB3A2E7C

    Can I upgrade – 1. Memory. 2. Mac OS – I have Snow Leopard 10.6.8. 3.Hard Drive 460GB to 1TB.

    Can anything else be upgraded?

    I had a PC before the Mac and I upgraded the PC to the Maximum that the Motherboard would take. Off=course the Mac is quite different.

    Thanks,

    God bless

    Henry




  • Thanks so much for the reply! I’ve been poking around all over and found a lot of conflicting advice. Can you fill me in on why the 2 x 4GB RAM should be moved to the upper slots (BANK 0 DIMM 0, and BANK 1 DIMM 0, right)?
    Thanks again!




  • Hello! I want to update the memory in my dual core late 2009 iMac from 4GB to 12GB. Currently, I have 2 x 2GB RAM that live in the two top slots. If I purchase 2 x 4GB RAM, should I install in the bottom two slots, or should each size pair live in its own bank together (one on top, one on bottom)?
    Thanks!




    • Thank you for your question copo. You will want to move your current 2 X 2GB RAM chips to the lower slots and install the new 4GB chips in the upper slots.

      Please let us know if you have any further questions.




      • Thanks so much for the reply! I’ve been poking around all over and found a lot of conflicting advice. Can you fill me in on why the 2 x 4GB RAM should be moved to the upper slots (BANK 0 DIMM 0, and BANK 1 DIMM 0, right)?
        Thanks again!




  • Someone just gave me their old iMac 21.5″ late 2009 desktop computer. I’ve wiped it and recently installed the latest operating sys. macOS Sierra version 10.12.6, but now it barely runs. My question is- is it worth it to upgrade the memory or just better off getting rid of the thing? It currently has only 4GB installed.




  • I have a 2010 27″ Mac that I replaced with a 2015 model when the hard drive died (Apple Store Tech diagnosis). I don’t have a pressing need for it; but, is there any reason to try to bring it back to life (with your expert help)?




    • Hi, Martin. A 2010 iMac can still be a great machine with the right upgrades. Please feel free to contact our customer support team, which will be more than happy to go over your options. As for reasons to bring it back to life, it can make a perfect hand-me-down or backup machine.




    • I had a 2009 27″ iMac that stopped booting when I was in the middle of a big project. I had a new iMac delivered the next day and put the 2009 on the shelf for two years. Last fall I took the busted one in to the Apple Store and found the problem was a bad video card, a cheap fix. I then replaced the optical drive with an OWC data doubler 1TB SSD and the 2009 Mac now performs better than my newer Mac. For a few hundred bucks I have a great machine. It was well worth it.




  • What is the minimum RAM required for MB Air 2012 to run Sierra.

    Storage ?




  • Re: Upgrading to Sierra
    I have two mid-2011 iMacs that are running well on El Capitan. Both have max RAM and SSDs added behind the optical drive. It is said that the latest system isn’t always a good idea in an older computer that wasn’t designed to run it. Are these mid-2011s up to running Sierra without becoming sluggish?




  • Great article, and timely in my case. I just bought from OWC and installed 16 GB RAM and a 1TB SSD with the DIY kit in a 2010 21″ iMac that I picked up used for $400. The OWC DIY kit had everything I needed. Only thing additional was an external USB enclosure for the original 3.5″ drive. The OWC installation videos are great, much better than some of the other teardown/fixit sites that have only step by step pictures. If a picture is worth a thousand words, and a video is worth a thousand pictures, then how many words your videos worth? AWESOME tech support from OWC!

    Long time OWC customer, many DIY upgrades going back to G3/G4 days, thought the iMac case would be too tough to crack open after working in those massive desktop and tower cases of yesteryear. Your video shows exactly how easy it is. Now, can you make one to show how to replace the thermal paste on the CPU and video card heat sinks in an iMac? …




  • Question, I have an early 2009 24″ iMac. I’m thinking it needs a motherboard replacement. I would like to replace with say a board from a 2011. Is that possible? If not how new can I go? I also plan on replacing the 1TB with a SSD drive.




    • Thank you so much for your question! We are very sorry but we are not able to verify if a 2011 motherboard will be compatible with your early 2009 24″ iMac. We would recommend to contact the manufacturer for any motherboard upgrades or replacements.